Vermont American 23155 45-Degree Carbide Tipped Chamfer Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch Shank

Vermont American 23155 45-Degree Carbide Tipped Chamfer Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch Shank Reviews

More Picture

Vermont American 23155 45-Degree Carbide Tipped Chamfer Router Bit, 1/2-Inch Ball Bearing 2-Flute 1/4-Inch Shank Feature

• Razor sharp cutting edge diamond honed for smooth cuts
• Triple tempered shank for maximum durability
• Industrial micrograin carbide for smooth cut
• decorative bevel edging and concealed joints

1-3/8', Chamfer, 45 Degree, 1/2' Bearing, Double Flute, 1/4' Shank, Carbide Tip Router Bit, 2-3/16' Overall Length, Outer Diameter = 1-3/8', Cutting Length = 1/2' angle = 45 degree.

Go tO Store Now !!

More Products

• Bosch PR20EVSK Colt Palm Grip 5.6 Amp 1-Horsepower Fixed-Base Variable-Speed Router with Edge Guide
• Two Cherries 520-5750 Scraper with Prepared Edges

More Reviews

Jan 04, 2011 04:53:04

Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included

Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Reviews

More Picture

Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Feature

• Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included

Multiple G code imput , Servo motor, 2 hp 3 phase 220/440v,The straightforward machine design is supported with extensive technical documentation, telephone support, and warranty service Fully set up and ready to run, optional techincial training support for your staff available for a nominal fee.

Go tO Store Now !!

More Products

More Reviews

Jan 03, 2011 23:27:14

Model 3000 Coping Sled

Model 3000 Coping Sled Reviews

More Picture

Model 3000 Coping Sled Feature

• Use a Coping Sled when making those difficult small or narrow cross grain rail cuts.
• Align your material flush with the outside edge of the sled and clamp into place.
• Abrasive strips help hold the piece in place.
• Run the sled along your fence until you cut into the replaceable plastic guide block.
• All sleds are made in USA.

Use a Coping Sled when making those difficult small or narrow cross grain rail cuts. Align your material flush with the outside edge of the sled and clamp into place with the special holding clamp. Abrasive strips help hold the piece in place. Run the sled along your fence until you cut into the replaceable plastic guide block, which eliminates tear out. All sleds are made in USA. Our Model 3000 Coping Sled offers increased clamping capacity and versatility allowing it to be used on any tool with a miter slot. The extra long sled measures 6 1/2" x 18 1/2" and will allow you to clamp parts up to 6 1/4" wide, securely holding taller drawer fronts. Sled comes complete with a removable 3/8" x 3/4" slider bar allowing the sled to securely hold your work piece while sliding in the existing miter slot in your router table, shaper or table saw. Remove the slider bar for coping applications. The powerful clamping force of the yoke insures precise and accurate cuts.

Go tO Store Now !!

More Products

More Reviews

Jan 03, 2011 02:51:06

Woodstock W1145 1/2-Inch Rub Collar Bore Set, 4-Piece

Woodstock W1145 1/2-Inch Rub Collar Bore Set, 4-Piece Reviews

More Picture

If you do any kind of irregular shaping, these rub collars are a must! Rub collars are used for shaping curved work such as cathedral doors as well as many custom shapes. They are also used for limiting the depth of cut (same principle as router bits with guide bearings). Use them below, in between, or above cutters.

Go tO Store Now !!

More Products

More Reviews

Jan 02, 2011 08:18:04

Woodstock W1167 3/4-Inch by 1-1/4-Inch by 3/4-Inch Spacer

Woodstock W1167 3/4-Inch by 1-1/4-Inch by 3/4-Inch Spacer Reviews

More Picture

Woodstock W1167 3/4-Inch by 1-1/4-Inch by 3/4-Inch Spacer Feature

• 1-1/4-Inch outside diameter
• 3/4-Inch inside diameter
• 3/4-Inch Overall height

3/4" x 1-1/4" for 3/4" spindles. Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bear against the spindle nut. Every shaper owner needs a set of these on hand.

Go tO Store Now !!

More Products

More Reviews

Jan 02, 2011 15:21:08

Large Push Block By Peachtree Woodworking - PW1222

Large Push Block By Peachtree Woodworking - PW1222 Reviews

More Picture

Large Push Block By Peachtree Woodworking - PW1222 Feature

• Natural rubber friction pads gip the workpiece
• Use to guide wood through cutters
• Work with confidence, keeping this block between your fingers the cutting tool
• Use with all table saws, radial saws, shapers jointers
• Constructed of day-glo orange high-impact molded plastic

The natural rubber friction pads grip your workpiece for added safety as you guide your work through the cutting tool keeping your fingers at a safe distance from the blade.

Go tO Store Now !!

More Products

More Reviews

Jan 01, 2011 13:54:03

ACCURA shaper fence assembly complete NIB

ACCURA shaper fence assembly complete NIB Reviews

More Picture

ACCURA shaper fence assembly complete NIB Feature

• Will replace the fence on many older shapers
• Heavy cast iron construction
• Great upgrade!
• Micro-adjustable
• 4" dust port included

This listing is for a brand new heavy duty replacement fence assembly, complete with safety hold downs and mounting hardware. It will fit many older Delta and Powermatice shapers and will also fit many Taiwanese units. A super upgrade and a clean unit!

Go tO Store Now !!

More Products

More Reviews

Jan 01, 2011 17:40:16