Double End Clay Shapers - 2, Double End Clay Shaper, Taper Point

Double End Clay Shapers - 2, Double End Clay Shaper, Taper Point Reviews

Other Picture

These highly versatile, brush-like tools have a flexible, heat and solvent resistant silicone tip on one end that allows for expressive work with exceptional control. Flip to the other end for a steel ribbon tool. Both tips clean easily.

Visit Store Now !!

Detail Products

Detail Reviews

May 28, 2011 13:42:10

Raised Panel Shaper Cutters for 3/4 Inch Material - Traditional w/ Radius

Raised Panel Shaper Cutters for 3/4 Inch Material - Traditional w/ Radius Reviews

Other Picture

Amana Tool SC406 Carbide Tipped 3-Wing Traditional w/Radius Raised Panel 13 Deg Angle x 13/64 Radius x 4-15/16 Dia x 9/16 Cut Height x 1/2 & 3/4 Bore Shaper Cutter for 3/4 Material

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 10:03:08

Insert Shaper Cutter Accessories - Bearing only

Insert Shaper Cutter Accessories - Bearing only Reviews

Other Picture

Amana Tool 61660 Insert Shaper Cutter Accessory 1-1/4 x 2-1/2 Bearing

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 00:41:05

Dremel MM722 Flat Blade Kit

Dremel MM722 Flat Blade Kit Reviews

Other Picture

Dremel MM722 Flat Blade Kit Feature

• Part of Multi-Flex Accessory System
• Designed for Detail Cutting
• Saw Blade Kit (3) - General straight cutting of a variety of materials (wood, PVC, copper pipe)
• Includes (3) blades

Includes (3) Multi-Flex Saw Blades - MM722

Visit Store Now !!

Detail Products

• Dremel MM721 Spiral Blade Kit
• Dremel MM720 Yoke Cutting Accessory Kit
• Dremel MM723 Carbide Sander Kit

Detail Reviews

May 23, 2011 01:57:16

Blade Nut Replacement Part for Lamello® Shaper Cutterheads

Blade Nut Replacement Part for Lamello® Shaper Cutterheads Reviews

Other Picture

Amana Tool 67172 4mm x 0.5mm x 11.1mm T.C Blade Nut

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 11:43:03

Stile & Rail Cabinet Door Cutter Sets for 1-3/8 Inch Material - Bead

Stile & Rail Cabinet Door Cutter Sets for 1-3/8 Inch Material - Bead Reviews

Other Picture

Amana Tool SC582 2-Piece Carbide Tipped 3-Wing Stile & Rail Bead Cabinet Door 2-27/32 Dia x 1-9/16 Cut Height x 5/16 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 Material

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 06:52:05

Shaper table extension for Reliant/Accura/Jet/Lobo, etc

Shaper table extension for Reliant/Accura/Jet/Lobo, etc Reviews

Other Picture

Shaper table extension for Reliant/Accura/Jet/Lobo, etc Feature

• 20" x 7"
• Will fit Reliant/Jet/Accura/Grizzly/Star etc

This listing features a heavy duty cast iron shaper extension wing. It will fit many of the 1 1/2-2 hp shapers on the market. We also have replacement parts for many other machines of this type. Please contact us at hamilton@ccia.net with questions on any parts needed for Reliant machines of any type.

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 02:30:05

Stile & Rail Cabinet Door Cutter Sets for 3/4 Inch Material - Ogee

Stile & Rail Cabinet Door Cutter Sets for 3/4 Inch Material - Ogee Reviews

Other Picture

Amana Tool SC444 2-Piece Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 2-11/16 Dia x 1 Cut Height x 1/8 Radius x 1/2 & 3/4 Bore Shaper Cutter Set for 3/4 Material

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 03:31:04

Woodstock W1185 3/4-Inch Rub Collar Bore Set "B", 5-Piece

Woodstock W1185 3/4-Inch Rub Collar Bore Set "B", 5-Piece Reviews

Other Picture

Woodstock W1185 3/4-Inch Rub Collar Bore Set "B", 5-Piece Feature

• Includes:2-1/4Inch by 3/4Inch, 2-5/16-Inch by 3/4-Inch, 2-3/8-Inch by 3/4-Inch, 2-7/16Inch by 3/4-Inch, 2-1/2-Inch by 3/4-Inch and 2 Straight T-bushings

If you do any kind of irregular shaping, these rub collars are a must! Rub collars are used for shaping curved work such as cathedral doors as well as many custom shapes. They are also used for limiting the depth of cut (same principle as router bits with guide bearings). Use them below, in between, or above cutters.

Visit Store Now !!

Detail Products

Detail Reviews

May 17, 2011 10:16:12

Dremel TR615 Corner Rounding Bit

Dremel TR615 Corner Rounding Bit Reviews

Other Picture

Dremel TR615 Corner Rounding Bit Feature

• Ideal for routing decorative edges and rounded corners
• Used on wood and other soft materials
• Easy for novice users to get started, precision for advanced users
• One handed ergonomic solution for routing

Includes Trio 1/8-in Corner Rounding Bit - TR615

Visit Store Now !!

Detail Products

• Dremel TR618 Chamfer Bit
• Dremel TR560 Trio Guidepoint Bit
• Dremel TR562 Tile Cutter
• Dremel 6800-01 Trio Rotary Tool Kit
• Dremel TR561B Multi-Purpose Bit, HSS, 2x

Detail Reviews

May 16, 2011 11:40:13

EDCO 81030 Walk-Behind Saw Accessory Upcut Saw - Vac Port Blade Guard

EDCO 81030 Walk-Behind Saw Accessory Upcut Saw - Vac Port Blade Guard Reviews

Other Picture

EDCO 81030 Walk-Behind Saw Accessory Upcut Saw - Vac Port Blade Guard Feature

• Walk-behind saw accessory
• Used for SB-14 model saws
• Required during use of a vacuum
• Designed to withstand rigors of everyday use
• Provides straight, smooth cuts

The Vac-Port Blade Guard is an accessory for the SB-14 Upcut walk-behind saw. It is required when using a vacuum with saw. Walk-behind saws are designed to withstand the rigors of everyday use while providing straight, smooth cuts.

Visit Store Now !!

Detail Products

Detail Reviews

May 12, 2011 22:18:11

Woodhaven 524 Angled Coping Sled

Woodhaven 524 Angled Coping Sled Reviews

Other Picture

Woodhaven 524 Angled Coping Sled Feature

• Our Coping Sled works on both the router and shaper, either in the miter slot or against the fence.
• Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence.
• 524 Angled Coping Sled holds stock up to 8" wide. Heavy duty 1/2" phenolic base (11-3/4" x 15-3/4") will not distort from clamp pressure. Fence angles up to 60º with stops at 0, 10, 15, 22-1/2, 30 & 45º.
• Features two 500 lb. Inboard Toggle Clamps.
• Lifetime guarantee against defects in material or workmanship. Made in the USA!

The Woodhaven Coping Sled is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Inboard Toggle Clamps can be positioned anywhere on the 24" long Ultra Track fence. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 1" Riser Kit. Two adjustable feed handles provide firm control over the sled and your work. Optional 525S Flip Stop available for repetitive work.

See the Coping Sleds in action at Woodhaven.com!

Visit Store Now !!

Detail Products

Detail Reviews

May 12, 2011 03:15:11

Dremel MM460 1-1/8-Inch Wood Flush Cut Blade

Dremel MM460 1-1/8-Inch Wood Flush Cut Blade Reviews

Other Picture

Dremel MM460 1-1/8-Inch Wood Flush Cut Blade Feature

• Wider blade design - 28mm
• High-Carbon Steel blade material for precision wood cutting
• Offset design for flush cutting capability
• Great for general wood flush cutting applications

Includes Multi-Max 1-1/8-in Wood Flush Cut Blade - MM460

Visit Store Now !!

Detail Products

Detail Reviews

May 11, 2011 16:00:11